SCPI Command Reference
E4980A/AL commands
Parameter
ON or 1
OFF or 0 (Preset value)
Equivalent key
No equivalent key is available on the front panel.
:SOURce:DCSource:STATe
Syntax
:SOURce:DCSource:STATe {ON|OFF|1|0}
:SOURce:DCSource:STATe?
Description
Enables the DC Source. The DC source is automatically turned OFF after
recalling the state from memory. When DC Source is set to ON, DC Source
voltage that has been set with
This is available when option 001 is installed.
Parameter
ON or 1
OFF or 0 (Preset value)
Equivalent key
[DC Source]
:SOURce:DCSource:VOLTage[:LEVel]
Syntax
:SOURce:DCSource:VOLTage[:LEVel] <numeric>
:SOURce:DCSource:VOLTage[:LEVel]?
Description
Sets the DC source's voltage level
This is available when option 001 is installed.
Keysight E4980A/AL Precision LCR Meter
Description
Does nothing
Does nothing
:SOURce:DCSource:VOLTage[:LEVel]
Description
Enables the DC Source
Disables the DC Source
is output.
363