Keysight E4980A User Manual page 425

Manual Changes
Manual Changes
For "Status" of the firmware revision A.02.00 or lower, which displays the LAN
connection status, refer to the following table.
Status
OK
DISCONNECTED
INITIALIZING
FAILED
The firmware revision A.01.0x does not support the following SCPI command.
Please delete the descriptions about this command from this manual.
— ":SYSTem:COMMunicate:LAN[:SELF]:CONFigure" on page 367
The firmware revision A.02.00 or later does not support the following SCPI
commands.
— ":SYSTem:COMMunicate:LAN[:SELF]:AIP[:STATe]" on page 366
— ":SYSTem:COMMunicate:LAN[:SELF]:DHCP[:STATe]" on page 368
Keysight E4980A/AL User's Guide
Description
LAN connection is OK
Disconnected from the LAN
LAN connection is being initialized
LAN connection has failed.
-425