System Configurations
SYSTEM CONFIG Page
Softkey
MINUTE INCR +
MINUTE DECR -
SECOND INCR +
SECOND DECR -
When you enter the hour with the entry keys, use a value within the range
of 0 (midnight) through 23 (11:00 pm).
Configuring the GPIB Address
Functional Description
Before you can control the E4980A/AL by issuing GPIB commands from an
external controller connected via its GPIB connector, you have to configure the
GPIB address of your E4980A/AL. For information on the concept and
implementation of automatic configuration by use of GPIB, see
control system" on page
To configure the GPIB address:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the GPIB ADDR field.
Step 4. Enter a value with the entry keys in the range of 0 through 30.
Keysight E4980A/AL Precision LCR Meter
Description
Increments the minutes in steps of 1.
Decrements the minutes in steps of 1.
Increments the seconds in steps of 1.
Decrements the seconds in steps of 1.
222.
"GPIB remote
159