SCPI Command Reference
E4980A/AL commands
OFF or 0 (Preset value)
Equivalent key
[Meas Setup] - CORRECTION - SHORT - ON
[Meas Setup] - CORRECTION - SHORT - OFF
:CORRection:SPOT[1-201]:FREQuency
Syntax
:CORRection:SPOT[1-201]:FREQuency <numeric>
:CORRection:SPOT[1-201]:FREQuency?
Description
Sets the frequency for the specified measurement point. The mode selected by
:CORRection:METHod
Parameter
Range
Preset value
Unit
Equivalent key
[Meas Setup] - CORRECTION - FREQ
:CORRection:SPOT[1-201]:LOAD[:EXECute]
Syntax
:CORRection:SPOT[1-201]:LOAD[:EXECute]
Description
Executes LOAD correction at the specified measurement point. (No Query)
Equivalent key
[Meas Setup] - CORRECTION - FREQ - MEAS LOAD
:CORRection:SPOT[1-201]:LOAD:STANdard
Syntax
:CORRection:SPOT[1-201]:LOAD:STANdard <reference value for primary>,
<reference value for secondary>
:CORRection:SPOT[1-201]:LOAD:STANdard?
Description
Sets the standard reference values at the specified measurement point. The
measurement function for the reference values can be selected using
:CORRection:LOAD:TYPE.
Keysight E4980A/AL Precision LCR Meter
Description
Disables SHORT correction
is chosen as the correction mode for the specified point.
<Numeric>
20 to 2M
20
Hz
335