SCPI Command Reference
E4980A/AL commands
Example of Use
viVPrintf(AgtE4980A/AL, ":LIST:CURR 0.01, 9.9e37, 0.02" +
vbLf, 0)
Equivalent key
[Meas Setup] - LIST SETUP - LEVEL[A]
:LIST:DCSource:VOLTage
Syntax
:LIST:DCSource:VOLTage <point 1>,<point 2>,... ,<point n>
:LIST:DCSource:VOLTage?
Description
Clears the previous list sweep table, sets DC source voltage sweep as the list
sweep parameter, and sets DC source voltage points for the DC source voltage
list sweep. If the list sweep is not set for DC source voltage, the query
command returns error No. 230. The value 9.9E37 should be set for any empty
points.
Parameter
Range of n
Unit
Equivalent key
[Meas Setup] - LIST SETUP - DC SRC[V]
:LIST:FREQuency
Syntax
:LIST:FREQuency <point 1>,<point 2>,... ,<point n>
:LIST:FREQuency?
Description
Clears the previous list sweep table, sets frequency sweep as the list sweep
parameter, and sets frequency points for the frequency list sweep. If the list
sweep is not set for frequency, the query command returns error No. 230. The
value of 9.9E37 should be set for any empty points.
Parameter
Range of n
Unit
Example of Use
viVPrintf(AgtE4980A/AL, ":LIST:FREQ 1e2,2e2,5e2,9.9e37,1e3" +
vbLf, 0)
Equivalent key
[Meas Setup] - LIST SETUP - FREQ[Hz]
Keysight E4980A/AL Precision LCR Meter
<point n>
1 to 201
A
<point n>
1 to 201
Hz
355