Keysight E4980A User Manual page 229

Overview of Remote Control
LAN remote control system
Step 3. The Instrument Properties setting screen appears. Make the settings as
follows: Name: SICL_LAN (you can specify any name), Interface: TCPIP, Board
Number: 0, and TCPIP Address: TCPIP0::192.168.1.101::inst0::INSTR.
Figure 8-3 shows an example of control using the direct I/O interface that has
been set in the above procedure.
Figure 8-3 Example of control using Keysight VEE
Keysight E4980A/AL Precision LCR Meter 229