Configuring Measurement Conditions (Display and Function Related Settings)
LIST SWEEP SETUP Page
Sweep Parameter Auto-completion
Functional Description
When you want to enter multiple sweep parameters, you can use the
auto-completion feature to specify two points and have the sweep points
between them automatically entered.
Figure 4-23
Sweep parameter auto-completion
To quickly configure multiple sweep points:
Step 1. Press [Meas Setup].
Step 2. Press the LIST SETUP softkey.
Step 3. Using the cursor keys, select the sweep parameter field.
Step 4. Specify the start point by selecting the corresponding sweep point field (n)
with the cursor keys.
Step 5. Specify the end point by selecting the corresponding sweep point field (m)
with the cursor keys.
Keysight E4980A/AL Precision LCR Meter
149