Protection Against Electrostatic Discharge (Esd); Ensuring Adequate Free Space Around The Lcr Meter For Immediate Disconnection Of The Power Cable In Case Of Emergency - Keysight E4980A User Manual

Unpacking and Preparation
Environmental Requirements

Protection Against Electrostatic Discharge (ESD)

Figure 1-7
electronic components from damage by electrostatic discharge (ESD).
Figure 1-7 Example of a static-free work station
Ensuring Adequate Free Space around the LCR meter for Immediate
Disconnection of the Power Cable in Case of Emergency
As described in
attached to the power cable serves as the disconnecting device (device that
cuts off the power supply) for the E4980A/AL. When installing the E4980A/AL,
ensure that there is sufficient free space around the unit to permit quick
disconnection of the plug (from the AC outlet or the E4980A/AL unit) in case of
emergency.
28
shows the setup for a static-safe work station to protect the
"Disconnecting from the Supply Source" on page
Keysight E4980A/AL Precision LCR Meter
30, the plug