Frequency[:Cw]; Function:dcresistance:range:auto - Keysight E4980A User Manual

SCPI Command Reference
E4980A/AL commands
REAL
Example of Use
viVPrintf(AgtE4980A/AL, ":FORM REAL" + vbLf, 0)
Equivalent key No equivalent key is available on the front panel.

:FREQuency[:CW]

Syntax :FREQuency[:CW] <numeric>
:FREQuency[:CW]?
Description Sets the frequency for normal measurement.
Parameter
Range
Preset value
Unit
Resolution
Equivalent key [Display Format] - MEAS DISPLAY - FREQ
[Meas Setup] - MEAS SETUP - FREQ

:FUNCtion:DCResistance:RANGe:AUTO

Syntax :FUNCtion:DCResistance:RANGe:AUTO {ON|OFF|1|0}
:FUNCtion:DCResistance:RANGe:AUTO?
Description Enables the auto range function for DCR measurement.
Parameter
ON or 1 (Preset value)
OFF or 0
Equivalent key [Meas Setup] - MEAS SETUP - DCR RNG - AUTO
Keysight E4980A/AL Precision LCR Meter
1. The range varys depending on the frequency option.
Description
Sets the transfer mode to Binary
<Numeric>
1
20 to 2M
1k
Hz
Depends on the setting frequency.
Description
DCR measurement auto range ON
DCR measurement auto range OFF
345