Output Format Of Data Buffer Memory - Keysight E4980A User Manual

Overview of Remote Control
Data Buffer Memory

Output Format of Data Buffer Memory

There are two formats returned by the :MEM:READ? DBUF command: ASCII
and BINARY. Each format is described below. For sample programs using the
data buffer memory (output format: ASCII and BINARY), refer to the chapter on
sample programs.
o
Figure 8-17 ASCII format (Buffer memory)
o
254
ASCII Format
Figure 8-18 below shows the output format when the ASCII format is
selected as the data format. The data format and meaning of <DATA A>,
<DATA B>, <STATUS>, <BIN No.>, or <IN/OUT> are the same as those of the
ASCII data format described in Data Format of
BINARY Format
Figure 8-19 shows the output format when the BINARY format is selected
as the data format. The data format and meaning of <DATA A>, <DATA B>,
<STATUS>, <BIN No.>, or <IN/OUT> are the same as those of the BINARY
data format described in Data Format of
"Data Transfer" on page 260
"Data Transfer" on page 260
Keysight E4980A/AL Precision LCR Meter