Preparations Before Use; Verifying The Power Supply; Setting Up The Fuse - Keysight E4980A User Manual

Unpacking and Preparation

Preparations before Use

Preparations before Use

Verifying the Power Supply

Confirm that the power supplied to the E4980A/AL meets the following
requirements:
Table 1-2 Power Supply Requirements
Voltage
Frequency
Maximum power
consumption

Setting up the Fuse

Please use the following fuse type.
UL/CSA type, Slo-Blo, 520-mm miniature fuse, 3 A, 250 V (Keysight part
number 2110-1017)
When you need a fuse, contact your nearest Keysight Technologies sales and
service office. To verify and replace the fuse, remove the power cable and pull
out the fuse holder.
Figure 1-2 Fuse Holder and Power Cable Receptacle
Keysight E4980A/AL Precision LCR Meter
Requirements
90 to 132 Vac or 198 to 264 Vac
47 to 63 Hz
150 VA
1. Switched automatically by the E4980A/AL in conformity with the voltage used.
1
21