Keysight E4980A User Manual page 67

Display Format
MEAS DISPLAY Page
Table 3-21 DC bias signal current that can be set with INCR ++ / DECR
INCR ++ / DECR -- (A)
0,
1 , 2 , 3 , •••, 9 
10 , 20 , 30 , •••, 90 
100 , 200 , 300 , •••, 900 
1 m, 2 m, 3 m, •••, 9 m
10 m, 20 m, 30 m, •••, 90 m
100 m
Step 5. Press [DC Bias] to set the DC bias output to ON. DCBIAS appears in the status
display area and the LED indicator for DC bias lights up in orange.
Settling time for the DC bias signal voltage
Changing the DC bias requires a few milliseconds to several tens of
milliseconds. For details, refer to DC bias settling time in data sheet in
11 "Specifications and Supplemental Information"
Keysight E4980A/AL Precision LCR Meter
1. When option 001 is not installed, only 0 V, 1.5 V, and 2.0 V can be
set.
1
1. This cannot be set when option 001 is not installed.
Chapter
67