Setting The Scheduling Mode For An Interface Queue - Huawei S3700HI Configuration Manual - Qos

S3700HI Ethernet Switches
Configuration Guide - QoS
The interface view is displayed.
Step 3 Run:
qos queue queue-index static-cell cell-number
The minimum size of the static buffer in an interface queue is set.
----End

3.3.4 Setting the Scheduling Mode for an Interface Queue

The S3700 supports the following scheduling modes: PQ, DRR, WRR, PQ+DRR, and PQ
+WRR.
Context
The S3700 supports eight interface queues that can use different scheduling algorithms. During
queue scheduling, packets in a PQ queue are first scheduled. If there are multiple PQ queues,
the packets are scheduled in descending order of priorities of these PQ queues. After packets in
PQ queues are scheduled, packets in WRR or DRR queues are scheduled in a polling manner.
If you need to set the same scheduling parameters on multiple interfaces, you can perform the
configuration on the port group to reduce the workload.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Or run the port-group port-group-name command to enter the port group view.
Step 3 Run:
qos { pq | wrr | drr }
The scheduling mode of an interface queue is set to PQ, WRR, or DRR.
By default, WRR scheduling is used.
Step 4 (Optional) Run:
qos queue queue-index wrr weight weight
The weight of an interface queue in WRR mode is set.
By default, the weight in WRR mode is 1.
You need to perform this step only when the scheduling mode of an interface queue is set to
WRR or PQ+WRR.
Issue 01 (2012-03-15)
NOTE
Create a port group before performing this task. For details about creating a port group, see (Optional)
Configuring a Port Group in the S3700HI Ethernet Switches Configuration Guide - Ethernet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Congestion Avoidance and Congestion Management
Configuration
94