Creating A Local User; Optional) Setting The Access Type Of The Local User - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
No.
1
2
3
4
5
6

1.8.2 Creating a Local User

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
local-user user-name { password { simple | cipher } password | access-limit max-
number | ftp-directory directory | privilege level level | state { block |
active } }
A local user is created and parameters of the user are set.
If the user name contains the domain name delimiter, such as @, |, and %, the character string
before @ refers to the user name and the character string after @ refers to the domain name. If
the user name does not contain domain name delimiter, the entire character string represents the
user name and the user is authenticated in default domain.
You can use the local-user command to create a local user and set parameters of the local user.
To modify parameters of a local user, use the local-user access-limit, local-user ftp-
directory, local-user service-type, local-user privilege level, or local-user state command.
----End

1.8.3 (Optional) Setting the Access Type of the Local User

Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
*
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
Data
User name and password
Access type of the local user
Name of the FTP directory that the local user
can access
Status of the local user
Level of the local user
Maximum number of local access users
34