Tools Required To Prepare The Mx204 Router For Installation; Step 2: Install The Mx204 Chassis In The Rack - Juniper MX204 Quick Start Manual

Figure 6: Airflow Through the MX204 Router

Tools Required to Prepare the MX204 Router for Installation

• Blank panels to cover any slots not occupied by a component
• Mounting brackets, supplied with the router
• Sixteen screws for securing the mounting brackets to the chassis, supplied with the router
• Phillips (+) screwdriver, number 2, not supplied
• Four mounting screws, supplied with the router

Step 2: Install the MX204 Chassis in the Rack

To install the router in a rack or cabinet:
1. Position the router in front of the rack or cabinet.
2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and to a site ESD point.
3. Align the holes in the front mounting brackets with the holes on the side of the chassis (see
7 on page 9).
8
Figure