PTX5000 Packet Transport Router Hardware Guide
Power Distribution Unit LEDs
Table 9: Power Distribution Unit LEDs
Colour
State
Green
On steadily
Red
On steadily
Off
—
Power Supply Modules LEDs
Table 10: PSM-LED Mapping
No of PSMs per
PDU Type
PDU
Existing PDUs:
4
PDU-PTX-DC-120
PDU-PTX-DC-60
PDU-PTX-AC-W
PDU-PTX-AC-D
High Capacity
8
PDU:
PDU2-PTX-DC
Table 11: Power Supply Module LEDs on the Craft Interface
Color
State
Green
On steadily
22
One
OK
LED for each power distribution unit is located on the craft interface below the
host subsytem LEDs. The two LEDs are labeled
A status LED for each power supply module is located on the craft interface below the
PDU LEDs. The four PSM status LEDs are labeled
NOTE:
The existing PDUs support four PSMs whereas high capacity PDUs
support eight PSMs.
Mapping of the PSM LEDs on the Craft Interface and the PSMs
PSM 0 LED
PSM 0
PSMs 0 and 4
Description for normal capacity PDU/PSMs
The PSM is functioning normally.
and
0
Description
PDU is functioning normally.
PDU has failed.
PDU might be starting up or not receiving any input voltage. The
circuit breakers might be off.
through
0
PSM 1 LED
PSM 2 LED
PSM 1
PSM 2
PSMs 1 and 5
PSMs 2 and 6
Description for high capacity PDU/PSMs
All the PSMs are working.
.
1
.
3
PSM 3 LED
PSM 3
PSMs 3 and 7
Copyright © 2017, Juniper Networks, Inc.