PTX5000 Packet Transport Router Hardware Guide
Installing a PTX5000 High Capacity AC PSM
370
CAUTION:
Each High Capacity AC PSM weighs approximately 9.8 lb
(4.5 kg). Be prepared to support the full weight of the PSM as you remove
it from the PTX5000.
Place one hand underneath the PSM to support it and slide it completely out of the
4.
chassis.
Figure 240: Removing a High Capacity AC PSM
The High Capacity DC PSMs are smaller in dimensions compared to the first-generation
PSMs. So, you must install the PSM sleeves to install the High Capacity DC PSMs in the
chassis. See
"Installing the High Capacity PSM Sleeves" on page 380
Capacity AC PSM weighs approximately 9.8 lb (4.5 kg).
To install a High Capacity AC PSM:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Using both hands, slide the PSM into the chassis until the locking tab is engaged.
2.
for details. Each High
Copyright © 2017, Juniper Networks, Inc.