Ptx5000 Centralized Clock Generator Leds; Figure 10: Ccg; Table 12: Ccg Leds - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Related
Documentation

PTX5000 Centralized Clock Generator LEDs

24

Figure 10: CCG

1 2
3
1— OK FAIL
Three LEDs— , , and
display the status of the CCG.
2— ONLINE/OFFLINE
button
PTX5000 Hardware Component Overview on page 5
PTX5000 Centralized Clock Generator LEDs on page 24
Troubleshooting the PTX5000 Centralized Clock Generators on page 507
Table 12 on page 24 describes the functions of the CCG
the functions of the CCG port LEDs.

Table 12: CCG LEDs

Label Color
Green
OK
–
Yellow
FAIL
–
MASTER Blue
–
4
MASTER 3—
—that Two RJ-48 connectors labeled
BITS B
1.5444 MHz or 2.048 MHz. Two LEDs for
each BITS connector—
LINK
—that display the status of the BITS
ports.
4—
Four GPS connectors labeled
CLOCK
GPS1 SYNC
5 MHz or 10 MHz. The LEDs for the GPS ports
are not supported.
LEDs.Table 13 on page 25
State
On steadily
Off
On steadily
Off
On steadily
Off
BITS A
for BITS external clock inputs,
FAULT and
GPS0
GPS0 SYNC GPS1 CLOCK
, ,
, for GPS external clock inputs,
describes
Description
The CCG is online and is
functioning normally.
The CCG is not online or is not
powered on.
The CCG has detected a failure.
The CCG has not detected a
failure or is not powered on.
The CCG is functioning as the
master.
The CCG is functioning as the
backup or is not powered on.
Copyright © 2017, Juniper Networks, Inc.
and
, and