Replacing A Ptx5000 Pic Cfp2 Transceiver - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Related
Documentation

Replacing a PTX5000 PIC CFP2 Transceiver

444
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
Verify that the status LEDs on the PIC faceplate indicate that the CFP is functioning
7.
correctly. For more information about the PIC LEDs, see the PTX Series Interface Module
Reference. You can also verify PIC functioning by issuing the
command.
PTX5000 PIC Description on page 99
Troubleshooting PTX5000 PICs and PIC Cables on page 529
Prevention of Electrostatic Discharge Damage on page 611
Removing a PTX5000 PIC CFP2 Transceiver on page 445
Installing a PTX5000 PIC CFP2 Transceiver on page 446
show chassis fpc pic-status
Copyright © 2017, Juniper Networks, Inc.