Ptx5000 Fpc Upgrade Kit - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Related
Documentation

PTX5000 FPC Upgrade Kit

456
NOTE: For the specific hardware requirements for each FPC, see
"PTX5000 FPC Upgrade Kit" on page
Review all safety guidelines and warnings for the packet transport router.
4.
WARNING: To avoid harm to yourself or the router as you install and
maintain it, you must follow the safety procedures for working with Internet
routers, as well as the guidelines and warnings for working with and near
electrical equipment. However, providing an exhaustive set of guidelines
for working with electrical equipment is beyond the scope of this
documentation.
See "General Safety Guidelines and Warnings" on page
Upgrade the software on the PTX5000.
5.
NOTE: To accommodate the change in the addressing scheme with eight
Packet Forwarding Engines in the new FPC, you must upgrade the Junos OS
on the PTX5000 to Junos OS Release 14.1. The upgrade to Junos OS Release
14.1 requires a reboot of the PTX5000.
Upgrading the FPCs in an Operational PTX5000 Packet Transport Router on page 458
Upgrading the FPCs in an Offline PTX5000 Packet Transport Router on page 468
The following components are required to upgrade the FPCs to FPC2-PTX-P1A in a
PTX5000:
FPC2-PTX-P1A FPCs
SIB2-I-PTX5K SIBs
PDU2-PTX-DC power distribution unit
PSM2-PTX-DC power supply module
NOTE: PTX5K-PSM2TRAY is used only if you are upgrading the power
supplies to high capacity PDUs and PSMs.
456.
581.
Copyright © 2017, Juniper Networks, Inc.