Juniper PTX5000 Hardware Manual page 146

PTX5000 Packet Transport Router Hardware Guide
110
For an AC-powered PTX5000
See "PTX5000 AC Power Electrical Safety Guidelines" on page 612
See "PTX5000 AC Power System Specifications" on page 129
See "PTX5000 Three-Phase Delta AC Power Distribution Unit Specifications" on
page 130
See "PTX5000 Three-Phase Wye AC Power Distribution Unit Specifications" on
page 130
See "Calculating PTX5000 Power Consumption" on page 123
See "PTX5000 AC Power Cord Specifications" on page 132
For a DC-powered PTX5000:
See "PTX5000 DC Power Electrical Safety Guidelines" on page 615
See "PTX5000 DC Power System Electrical Specifications" on page 139
See "PTX5000 DC Power Distribution Unit Specifications" on page 140
See "Calculating PTX5000 Power Consumption" on page 123
See "PTX5000 DC Power Cable and Lugs Specifications" on page 141
See "PTX5000 DC Power Distribution" on page 143
Plan rack location, including required space clearances.
5.
PTX5000 Clearance Requirements for Airflow and Hardware Maintenance on
page 115
PTX5000 Physical Specifications on page 116
Verify that the plan for power installation meets all electrical safety guidelines.
6.
See "Site Electrical Wiring Guidelines" on page 118
Guidelines and Warnings" on page
Verify that your rack meets the minimum requirements for the installation of the
7.
packet transport router.
Rack Requirements for the PTX5000 Packet Transport Router on page 119
PTX5000 Chassis Description on page 11
Plan to secure the rack to the floor and building structure.
8.
See "Rack Requirements for the PTX5000 Packet Transport Router" on page
Acquire cables and connectors:
9.
Determine the number of cables and type of cable needed based on your planned
configuration.
The PTX Series Interface Module Reference describes the PICs supported on PTX
Series routers.
and "General Electrical Safety
609.
Copyright © 2017, Juniper Networks, Inc.
119.