Figure 54: Control Board Cb2-Ptx Leds; Table 39: Control Board Cb2-Ptx Leds - Juniper PTX5000 Hardware Manual

Table 39: Control Board CB2-PTX LEDs

Label
LCL-MASTER
FAIL
OK
LEDs
MC-MASTERSHIP
MASTER
STBY
RDY
Copyright © 2017, Juniper Networks, Inc.

Figure 54: Control Board CB2-PTX LEDs

1— LCL-MASTER FAIL
, , and
2— LINK ACT
and LEDs for the
HOST/ETHERNET port
Color
Blue
–
Yellow
–
Green
–
Chapter 5: Host Subsystem Components and Description
OK 3— Link and activity LEDs for the Gigabit
status LEDs
Ethernet ports labeled
(X)GE 17
4— MASTER
These LEDs are reserved for future use for
multichassis applications.
State
On steadily
Off
On steadily
Off
On steadily
Off
Off
Off
Off
(X)GE 0
through
STBY RDY
, , and status LEDs.
Description
Control Board is functioning
as the master.
Control Board is functioning
as the backup.
Control Board has failed.
No faults are detected on the
Control Board.
Control Board is online and is
functioning normally.
Control Board is offline.
These LEDs are reserved for
future use for multichassis
applications.
89