Juniper PTX5000 Hardware Manual page 216

PTX5000 Packet Transport Router Hardware Guide
180
Attach the side panels to the front mounting flanges, by using the cutouts in the side
3.
panel mounting holes to slide the panel behind the loosened screws. Tighten the
screws completely using the Phillips (+) screwdriver.
Attach the door to the side panels by placing the door on the hinges. Ensure that the
4.
door opens and closes properly, and the captive screws on the door align correctly
with the holes in the side panels.
NOTE: If the door is not aligned properly, loosen the screws securing the
side panels to the front-mounting flanges, and adjust the panels until the
door closes correctly, then tighten the screws completely using the
screwdriver.
Copyright © 2017, Juniper Networks, Inc.