Tools Required To Install The Ptx5000 Packet Transport Router Using A; Mechanical Lift; Installing The Ptx5000 By Using A Mechanical Lift - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Tools Required to Install the PTX5000 Packet Transport Router Using a Mechanical
Lift
Related
Documentation

Installing the PTX5000 By Using a Mechanical Lift

174
Gather the tools required to install the PTX5000:

Mechanical lift

Phillips (+) screwdriver, number 2
Overview of Installing a PTX5000 Packet Transport Router Using a Mechanical Lift
on page 173
Installing the PTX5000 By Using a Mechanical Lift on page 174
CAUTION: Before installing the PTX5000:
Ensure that a mechanical lift is available for the installation. Because of
the PTX5000 router's size and weight—up to 1200 lb (544.3 kg) depending
on configuration—you must use a lift to install the chassis.
Have a qualified technician verify that the rack is strong enough to support
the chassis weight and is adequately supported at the installation site.
Ensure that the rack is in its permanent location and is secured to the
building.
Ensure that the installation site allows adequate clearance for both airflow
and maintenance.
To install the PTX5000 by using a lift (see
and Figure 84 on page 178):
Load the PTX5000 onto the lift, making sure that the chassis rests securely on the
1.
mechanical lift.
CAUTION: Do not lift the PTX5000 by using the handles on the sides of
the chassis. Use these handles only to help position the PTX5000.
Using the lift, position the PTX5000 in front of the rack, centering it in front of the
2.
mounting shelf.
Lift the chassis slightly above the surface of the mounting shelf, and position it as
3.
close as possible to the shelf.
Figure 82 on page 176, Figure 83 on page
Copyright © 2017, Juniper Networks, Inc.
177,