Installation Overview; Overview Of Installing The Ptx5000 Packet Transport Router; Chapter 14 Installation Overview - Juniper PTX5000 Hardware Manual

CHAPTER 14

Installation Overview

Overview of Installing the PTX5000 Packet Transport Router

Copyright © 2017, Juniper Networks, Inc.
Overview of Installing the PTX5000 Packet Transport Router on page 155
PTX5000 Installation Safety Guidelines on page 156
You must proceed through the installation process in the following order:
Prepare the installation site for the packet transport router.
1.
See "Overview of Preparing the Site for the PTX5000 Packet Transport Router" on
page 109.
Review all safety guidelines and warnings for the packet transport router.
2.
WARNING: To avoid harm to yourself or the packet transport router as
you install and maintain it, you must follow the safety procedures for
working with packet transport routers, as well as the guidelines and
warnings for working with and near electrical equipment. However,
providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this documentation.
See "PTX5000 Installation Safety Guidelines" on page
Unpack the packet transport router and verify the parts received.
3.
See "Overview of Unpacking the PTX5000 Packet Transport Router" on page
Install the mounting hardware for your rack.
4.
See "Installing the PTX5000 Mounting Hardware for an Open-Frame Rack" on
page 169.
See "Installing the PTX5000 Mounting Hardware for a Four-Post Rack or Cabinet"
on page 165.
Install the packet transport router using a mechanical lift.
5.
156.
159.
155