Connecting The Router To External Devices; External Devices; Connecting The Ptx5000 Packet Transport Router To A Management Ethernet; Devices - Juniper PTX5000 Hardware Manual
Packet transport router
Hide thumbs
Also See for PTX5000:
- Quick start manual (82 pages) ,
- Hardware manual (320 pages) ,
- Hardware manual (721 pages)
Table of Contents
Advertisement
CHAPTER 20
Connecting the Router to External Devices
Tools and Parts Required to Connect the PTX5000 Packet Transport Router to External
Devices
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required to Connect the PTX5000 Packet Transport Router to External
Devices on page 187
Connecting the PTX5000 Packet Transport Router to a Management Console or
Auxiliary Device on page 188
Connecting the PTX5000 Packet Transport Router to a Management Ethernet
Device on page 189
To connect the PTX5000 to external devices, you need the following tools and parts:
2.5-mm flat-blade (-) screwdriver for the alarm relay contacts
Electrostatic discharge (ESD) grounding wrist strap (provided in the accessory kit)
Verifying the PTX5000 Packet Transport Router Parts Received on page 162
Connecting the PTX5000 Packet Transport Router to an External Alarm-Reporting
Device on page 190
187
Advertisement
Chapters
Table of Contents
Troubleshooting
