Figure 44: Ac Psm Leds; Table 25: Ac Power Supply Module Leds - Juniper PTX5000 Hardware Manual

Table 25: AC Power Supply Module LEDs

LED Color
Green
AC IN OK
–
Green
DC OUT OK
–
Red
FAULT
–
Copyright © 2017, Juniper Networks, Inc.

Figure 44: AC PSM LEDs

1 1 2 3
1— AC IN OK
LED
2— DC IN OK
LED
State
On steadily
Blinking
Off
On steadily
Blinking
Off
On steadily
Off
Chapter 4: Power System Components and Descriptions
3— FAULT
Description
PSM is receiving voltage.
PSM is receiving voltage outside the supported range.
Input voltage is not present.
Output is functioning normally, and input voltage is within the
supported range.
PSM is not enabled or is in a fault condition, or the input voltage
to the PSM is too low.
Output is not functioning normally because of a fault condition or
the PSM is not receiving input voltage.
PSM might be starting up, not properly installed, not receiving
sufficient power, or not functioning properly.
No faults have been detected for the PSM, or the PSM is not
receiving any input voltage.
LED
67