PTX1000 Power Supply LEDs
Copyright © 2018, Juniper Networks, Inc.
CAUTION:
To avoid electrical injury, carefully follow instructions in
"Connecting DC Power to the PTX1000" on page
Supply in a PTX1000" on page
PTX1000" on page
NOTE:
We recommend that the 48-VDC facility DC source be equipped with
a circuit breaker rated at 40 A (–48 VDC) minimum, or as required by local
code.
NOTE:
For more information about power system redundancy, see
Component Redundancy" on page
Each PTX1000 power supply has a status LED on the power supply faceplate.
Figure 21 on page 39
shows the location of the LED on a PTX1000 AC power supply and
Figure 22 on page 39
shows the location of the LED on a PTX1000 DC power supply.
Figure 21: AC Power Supply LED on a PTX1000
1— Status LED
Figure 22: DC Power Supply LED on a PTX1000
1— Status LED
91, and
"Removing a Power Supply from the
90.
21.
Chapter 1: Overview
76,
"Installing a Power
"PTX1000
39