Connecting The Router To Ground; Tools And Parts Required To Ground The Ptx5000 Packet Transport Router; Connecting The Ptx5000 Grounding Cable - Juniper PTX5000 Hardware Manual

CHAPTER 19

Connecting the Router to Ground

Tools and Parts Required to Ground the PTX5000 Packet Transport Router

Related
Documentation

Connecting the PTX5000 Grounding Cable

Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required to Ground the PTX5000 Packet Transport Router on page 185
Connecting the PTX5000 Grounding Cable on page 185
Gather the tools required to ground the PTX5000:
Grounding cable (which you must provide)
Grounding lug (0-AWG lug provided with the PTX5000)
M6 screws or UNC 1/4-20 screws
Electrostatic discharge (ESD) grounding wrist strap
PTX5000 Chassis Grounding Cable and Lug Specifications on page 112
Connecting the PTX5000 Grounding Cable on page 185
Verifying the PTX5000 Packet Transport Router Parts Received on page 162
You ground the PTX5000 by attaching a grounding cable to the chassis. You must provide
the grounding cable. An 0-AWG or 4-AWG (21.2 mm
PTX5000. See "PTX5000 Chassis Grounding Cable and Lug Specifications" on page 112
in the PTX5000 Packet Transport Router Hardware Guide
To ground the PTX5000 (see
Connect the grounding cable to a proper earth ground.
1.
Verify that a licensed electrician has attached the cable lug provided with the PTX5000
2.
to the grounding cable.
Make sure that grounding surfaces are clean and brought to a bright finish before
3.
grounding connections are made.
2
) cable lug is supplied with the
for more information.
Figure 88 on page 186):
185