CHAPTER 21
Connecting the Router to Power
Tools and Parts Required to Provide Power to the PTX5000 Packet Transport Router
Tools and Parts Required to Provide AC Power
Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required to Provide Power to the PTX5000 Packet Transport
Router on page 195
Installing the PTX5000 Cable Management System for High Capacity DC
PDU on page 196
Connecting Power to the PTX5000 60-A DC Input Power Trays on page 202
Connecting Power to the PTX5000 120-A DC Input Power Trays on page 207
Connecting Power to the PTX5000 Three-Phase Delta AC PDUs on page 210
Connecting Power to the PTX5000 Three-Phase Wye AC PDUs on page 215
Connecting Power to the PTX5000 High Capacity DC PDUs on page 221
Connecting Power to the PTX5000 High Capacity Delta AC PDUs on page 224
Connecting Power to the PTX5000 High Capacity Wye AC PDUs on page 230
Connecting Power to the PTX5000 High Capacity Single-Phase AC PDUs on page 235
Tools and Parts Required to Provide AC Power on page 195
Tools and Parts Required to Provide DC Power on page 196
If you have an AC-powered router, gather the tools required to connect the PTX5000 to
AC power:
AC power cords
Phillips (+) screwdriver, number 2 to access the metal AC wiring compartment and
remove or attach the AC power cord.
1/5-in. (5.5-mm) slotted screwdriver to attach the ground wire and input terminal wires
of the AC power cord.
195