Installing a PTX5000 High Capacity DC PSM
Copyright © 2017, Juniper Networks, Inc.
Figure 184: Removing a High Capacity DC PSM
The High Capacity DC PSMs are smaller in dimensions compared to the first-generation
PSMs. So, you must install the PSM sleeves to install the High Capacity DC PSMs in the
chassis. See
"Installing the High Capacity PSM Sleeves" on page 380
Capacity DC PSM weighs approximately 10.1 lb (4.6 kg).
To install a High Capacity DC PSM:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Using both hands, slide the PSM into the chassis until you feel resistance.
2.
Figure 185: Installing a High Capacity DC PSM
Press the ejector handle to insert the PSM into the chassis until is it fully seated.
3.
Chapter 27: Removing and Installing Power System Components
for details. Each High
309