Chassis Components And Descriptions; Ptx5000 Chassis Description; Rack; Figure - Juniper PTX5000 Hardware Manual

CHAPTER 2

Chassis Components and Descriptions

PTX5000 Chassis Description

Copyright © 2017, Juniper Networks, Inc.
PTX5000 Chassis Description on page 11
PTX5000 Midplane Description on page 14
PTX5000 Cable Management System on page 15
PTX5000 Craft Interface Description on page 16
PTX5000 Craft Interface LEDs on page 18
PTX5000 Centralized Clock Generator Description on page 23
PTX5000 Centralized Clock Generator LEDs on page 24
The PTX5000 Packet Transport Router chassis is a rigid sheet metal structure that
houses all the other hardware components (see
Figure 4 on page 13). The chassis measures 62.5 in. (158.8 cm) high, 33.1 in. (84.1 cm)
deep, and 17.5 in. (44.5 cm) wide. The chassis can be installed into many types of racks
or cabinets.
The chassis includes the following features (see
Figure 4 on page 13):
Front-mounting flanges for mounting in a four-post rack or cabinet.
Center-mounting metal brackets for center-mounting in an open-frame rack.
Handles on each side to facilitate positioning the packet transport router in the rack.
Do not use the handles to lift the packet transport router.
Two electrostatic discharge (ESD) points (banana plug receptacles), one front and
one rear (see Figure 5 on page
CAUTION: Before removing or installing components, attach an ESD strap
to an ESD point, and place the other end of the strap around your bare
wrist. Failure to use an ESD strap could result in damage to the hardware
components.
Figure 3 on page 12
Figure 3 on page 12
14).
and
and
11