PTX5000 Packet Transport Router Hardware Guide
Holding PTX5000 FPCs Horizontally
Related
Documentation
Maintaining the PTX5000 PICs
Purpose
Action
490
To hold an FPC horizontally:
Orient the FPC so that the faceplate is facing you.
1.
Grasp the top edge with your left hand and the bottom edge with your right hand.
2.
You can rest the faceplate of the FPC against your body as you carry it (see
Figure 290 on page
490).
Figure 290: Holding an FPC Horizontally
PTX5000 FPC Description on page 95
Replacing a PTX5000 FPC on page 429
For optimum performance, verify the condition of the PICs.
On a regular basis:
Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the PTX Series Interface Module Reference. If the FPC
that houses the PIC detects a PIC failure, the FPC generates an alarm message to be
sent to the Routing Engine.
A PIC LED lit green indicates that the PIC is functioning normally.
Copyright © 2017, Juniper Networks, Inc.