Ptx5000 Midplane Description; Figure 5: Esd Points On The Packet Transport Router - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Related
Documentation

PTX5000 Midplane Description

14

Figure 5: ESD Points on the Packet Transport Router

PTX5000 Hardware Component Overview on page 5
PTX5000 Packet Transport Router Description on page 3
PTX5000 Physical Specifications on page 116
Rack Requirements for the PTX5000 Packet Transport Router on page 119
PTX5000 Chassis Grounding Cable and Lug Specifications on page 112
The midplane is located in the center of the chassis and forms the rear of the Flexible
PIC Concentrator (FPC) card cage. The FPCs install into the midplane from the front of
the chassis; and the Switch Interface Boards (SIBs), Routing Engines, Control Boards,
Centralized Clock Generators (CCGs), and power distribution units (PDUs) install into
the midplane from the rear of the chassis. The cooling system components also connect
to the midplane.
The midplane performs the following major functions:
ESD
point
Copyright © 2017, Juniper Networks, Inc.