Installing The High Capacity Psm Sleeves - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
Related
Documentation

Installing the High Capacity PSM Sleeves

380
DC Output
Hours Used
Firmware Version
PDU 0 PSM 5 status:
State
Temperature
Fans
AC Input
DC Output
Hours Used
Firmware Version
PDU 0 PSM 6 status:
State
Temperature
Fans
AC Input
DC Output
Hours Used
Firmware Version
PDU 0 PSM 7 status:
State
Temperature
Fans
AC Input
DC Output
Hours Used
Firmware Version
PTX5000 AC Power System Description on page 42
Video:
Installing the Metal Sleeves for High Capacity AC or DC PSMs
The High Capacity AC and DC PSMs are smaller than the AC PSMs and 60-A or 120-A
DC PSMs. Eight High Capacity AC or DC PSMs can be installed in a PTX5000. You must
insert the PSM metal sleeves, provided with the High Capacity power system upgrade
kit, in front of the PTX5000 router chassis before installing the PSMs. To install the PSM
sleeve, you require the following tools and parts:
Electrostatic discharge (ESD) grounding wrist strap (not provided)
Phillips (+) screwdriver, number 1 (not provided)
PSM sleeve and bracket—eight for each chassis (provided)
NOTE: Each PSM sleeve can house two PSMs.
PSM slot label—two for each chassis (provided)
OK
259
01.01
Online
OK 28 degrees C / 82 degrees F
OK
OK
OK
259
01.01
Online
OK 28 degrees C / 82 degrees F
OK
OK
OK
258
01.01
Online
OK 28 degrees C / 82 degrees F
OK
OK
OK
259
01.01
Copyright © 2017, Juniper Networks, Inc.