Installing A Ptx5000 Vertical Fan Tray; Figure 162: Removing The Vertical Fan Tray - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide

Installing a PTX5000 Vertical Fan Tray

284
Grasp the handle and pull the fan tray until it stops (approximately 1.5 inches).
3.
Place one hand under the fan tray to support it and pull the fan tray completely out
4.
of the chassis.
WARNING: To avoid injury, keep tools and your fingers away from the fans
as you slide the fan tray out of the chassis. The fans might still be spinning.

Figure 162: Removing the Vertical Fan Tray

FAN TRA
PTX Y
VER TIC
AL
To install a replacement vertical fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the fan tray handle and insert it straight into the chassis.
2.
Figure 163 on page 285):
Copyright © 2017, Juniper Networks, Inc.