Juniper PTX5000 Hardware Manual page 563

Copyright © 2017, Juniper Networks, Inc.
SIB5 Online
SIB6 Online
SIB7 Online
SIB8 Online
FPC0 Online
FPC1 Online
FPC2 Online
FPC3 Online
FPC4 Offline
FPC5 Online
FPC6 Online
FPC7 Offline
Use the following show chassis fpc detail
6.
information. The following examples specify a slot number, which is optional:
user@host> show chassis fpc detail 7
Slot 7 information:
State
Reason
user@host> show chassis fpc detail 4
Slot 4 information:
State
Reason
The output states indicate the following:
—The FPC failed to initialize.
Diagnostics
—The FPC is not receiving enough power. Check the chassisd messages
No power
for power allocation information.
Chassis Power
Total Power
PDU 0
PSM 0
Input 1
PSM 1
Input 1
PSM 2
Input 1
PSM 3
Input 1
Offlined due to config
the Junos OS to Make a Flexible PIC Concentrator Stay Offlinepower.
Unresponsive —There might be a hardware failure on the FPC. Reseat the FPC and
reboot.
None
None
None
None
None
None
None
None
None
None
command to display more detailed
Offline
No power
Offline
Configured power off
Input(V) Used(W)
3043
3043
54 348
54 630
0 0
54 2065
—Check if the FPC is configuration to be off. See Configuring
Chapter 37: Troubleshooting Components
527