Figure 111: Removing The Metal Retaining Bracket From A Three-Phase Wye Ac; Figure 112: Retaining Nut On A Three-Phase Wye Ac Power Cord - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide
216
Using a number 2 Phillips (+) screwdriver, loosen the four captive screws that fasten
3.
the metal retaining bracket to the PDU, and remove the metal retaining bracket from
the PDU (see Figure 111 on page
Figure 111: Removing the Metal Retaining Bracket from a Three-Phase
Wye AC PDU
Unscrew the retaining nut from the AC power cord (see
4.
Figure 113 on page 217).

Figure 112: Retaining Nut on a Three-Phase Wye AC Power Cord

1— Retaining nut
216).
1
2
2— Three-phase wye AC power cord
Figure 112 on page 216
Copyright © 2017, Juniper Networks, Inc.
and