PTX5000 Packet Transport Router Hardware Guide
PTX5000 Craft Interface Description
Craft Interface Front Panel
16
Maintaining the PTX5000 PIC Cables on page 491
Installing the PTX5000 Cable Management System for High Capacity DC PDU on
page 196
The craft interface allows you to view status and troubleshooting information at a glance
and to perform many system control functions. It is hot-insertable and hot-removable.
The craft interface is located at the upper front of the PTX5000 Packet Transport Router.
Craft Interface Front Panel on page 16
Craft Interface LCD on page 17
LCD Navigation Buttons on page 18
Figure 6 on page 16
shows the craft interface.
Figure 6: Craft Interface
1
2
7
1—
Alarm relay contacts
2—
SIB LEDs
3—
Host Subsystem LEDs
4—
CCG LEDs
5—
Fan tray LEDs
The front panel of the craft interface contains:
A four-line LCD display, along with six navigation buttons. The LCD display operates
in Idle mode or alarm mode.
Alarm relay contacts.
Two configuration switches:
The M/S configuration switch must be set to
The CHASSIS ID configuration switch must always be set to
3
4
5
6
1
2
8
9
6—
Alarm LEDs and ACO/LT button
7—
M/S CHASSIS NUM
switches
8—
Power system LEDs
9—
LCD
10—
LCD navigation buttons
S
.
10
configuration
.
0
Copyright © 2017, Juniper Networks, Inc.