PTX5000 Packet Transport Router Hardware Guide
Table 24: High Capacity Wye AC PDU LEDs (continued)
LED
CB OK
AC input (
) LED
~
Related
Documentation
PTX5000 Power Supply Module LEDs
AC Power Supply Module LEDs
66
Color
Green
–
Green
–
Understanding Normal-Capacity Power System Power Zones on page 71
PTX5000 AC Power System Description on page 42
PTX5000 DC Power System Description on page 33
PTX5000 Power Supply Module LEDs on page 66
Maintaining the PTX5000 Power System on page 492
Troubleshooting the PTX5000 Power System on page 535
AC Power Supply Module LEDs on page 66
High Capacity AC Power Supply Module LEDs on page 68
60-A and 120-A DC Power Supply Module LEDs on page 68
High Capacity DC Power Supply Module LEDs on page 69
Figure 44 on page 67
describes the LEDs on the AC power supply module (PSM) faceplate.
State
Description
On steadily
Circuit breaker is powered on.
Off
This LED can be off for one of the following
reasons:
Circuit breaker is not powered on. The circuit
breaker might have been turned off manually,
or the host subsystem detected a failure and
turned off the circuit breaker.
The PDU is not receiving any input voltage.
The circuit breaker is on but the input voltage
is under –100 VAC.
On steadily
PDU is receiving AC voltage.
Off
AC input voltage is not present, or is under
–100 VAC.
Copyright © 2017, Juniper Networks, Inc.