Figure 88: Connecting The Grounding Cable - Juniper PTX5000 Hardware Manual

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

PTX5000 Packet Transport Router Hardware Guide

Documentation

Place the grounding cable lug over the grounding points on the bottom rear of the

chassis. The top pair is sized for M6 screws, and the bottom pair is sized for UNC 1/4-20

screws. You can use either pair of grounding points. UNC 1/4-20 screws are provided

in the accessory kit.

Secure the grounding cable lug to the grounding points, first with the washers, then

with the screws.

Verify that the grounding cabling is correct, that the grounding cable does not touch

or block access to the PTX5000 components, and that it does not drape where people

could trip on it.

Figure 88: Connecting the Grounding Cable

PTX5000 Chassis Description on page 11

Tools and Parts Required to Ground the PTX5000 Packet Transport Router on page 185

Table of Contents