Troubleshooting Ptx5000 Pics And Pic Cables; Troubleshooting Ptx5000 Pics - Juniper PTX5000 Hardware Manual

Troubleshooting PTX5000 PICs and PIC Cables

Troubleshooting PTX5000 PICs

Problem
Solution
user@host> show chassis alarms
1 alarm currently active
Alarm time
2012-11-02 17:46:53 PDT
user@host> show chassis fpc pic-status
Slot 0 Online FPC E
PIC 0 Online 24x 10GE(LAN) SFP+
PIC 1 Online 24x 10GE(LAN) SFP+
Slot 2 Online FPC E
PIC 0 Online 24x 10GE(LWO) SFP+
PIC 1 Online 4x100GE CFP2
Slot 3 Online FPC E
PIC 0 Online 4x100GE CFP2
PIC 1 Online 4x100GE CFP2
Slot 4 Online FPC
PIC 0 Online 2x 100GE CFP
PIC 1 Online 2x 100GE CFP
Slot 7 Online FPC E
PIC 0 Online 48x10G/12x40G(LWO)QSFP+
Copyright © 2017, Juniper Networks, Inc.
PTX5000 FPC LEDs on page 98
Maintaining the PTX5000 FPCs on page 485
Replacing a PTX5000 FPC on page 429
Configuring the Junos OS to Make a Flexible PIC Concentrator Stay Offline
Troubleshooting PTX5000 PICs on page 529
Troubleshooting PTX5000 PIC Transceivers on page 531
Description: A PIC LED lit red indicates a problem with the PIC.
To troubleshoot a PIC:
Check the LED of the PIC. Look at the LEDs located on the PIC faceplate. For
STATUS
1.
information about the meaning of LED states on different PICs, see the PTX Series
Interface Module Reference.
Issue the
show chassis alarms
2.
the alarms on different PICs, see the PTX Series Interface Module Reference
Class Description
Major FPC 3 PIC 1 Failure
Check the status of the PICs. issue the
3.
slots in each FPC are numbered from
Chapter 37: Troubleshooting Components
command to check for alarms. For information about
show chassis fpc pic-status
through , top to bottom:
0 1
command. The PIC
529