How to Enter Dialysis Program:
a) Turn the machine on and allow the "Select Program" screen (1) to appear.
b) Select the screen's 'Dialysis' button to call the Dialysate ("Select Concentrate") screen (2).
c) Select the screen's 'Conc' button. A list of up to 10 ACID concentrates appears.
d) Using the arrow keypads, select the ACID that is connected to the machine.
e) Press 'CONFIRM' to place the machine into Dialysis Program.
NOTE: The machine remains in idle mode UNLESS CONFIRM is pressed!
f)
Selecting the screen's 'Home' tab calls the 'Home' screen (3).
g) While troubleshooting, the Treatment clock (Figure right) MUST be off i.e. "Tx
Paused"!
Part h next page
2008K/K2 Troubleshooting Guide
P/N 507298 Rev. H
Page 17