The 5-pin female connectors can be unplugged and returned with the
power on without causing damage
CAUTION!
The green 8-pin Heater Connector (Figure right) is connected
to 120 Volts AC!
M. Figure below, if asked to measure DC voltages (V
meter's ground (black) lead to the card cage (i.e. chassis ground).
Figure 1 – Distribution Board
Figure 2 – Chassis Ground
End of Using the Troubleshooting Guide
2008K/K2 Troubleshooting Guide
P/N 507298 Rev. H
) and in some cases resistance (Ω) connect the
DC
Page 4