T- 2.1.8 T5 Less Than 2.0 Volts - Fresenius Medical Care 2008K2 Troubleshooting Manual

T- 2.1.8 T5 LESS THAN 2.0 VOLTS

Per the Figure below, measure again at the Power Logic Board's X2 cable,
the REAR of the machine). TWO (2) possible scenarios:
1) IF (and ONLY if) 9.0 volts DC OR MORE: Proceed to
2) IF LESS THAN 9.0 volts DC: See procedure number
LEFT BLANK INTENTIONALLY
2008K/K2 Troubleshooting Guide
P/N 507298 Rev. H
pin 6
(TOP row, three pins from
page 278
, procedure number T- 2.6.0.
T- 2.2.0 (page 274).
Page 273