Press and hold
CHANNEL OFF
(approximately
seconds) and then release to initiate power
1.5
down.
• During power off sequence, Main Display flashes
Powering Down.
• Once all attached modules are powered off, PC Unit
automatically powers down.
NOTE:
To interrupt the power down sequence, quickly press any key
(except
SYSTEM ON
1.
Press
OPTIONS
2.
Press Display Contrast soft key.
3.
Adjust display and return to main screen (reference
"Start-Up", "Adjusting Display Contrast" procedure).
Alaris
System Directions for Use
®
PC Unit Section
Power Off System
key until a beep is heard
) on the PC Unit.
System Options
Display Contrast
key.
Powering Down
SILENCE
OPTIONS
1
2
3
4
6
5
7
8
9
.
0
CLEAR
System Options 1 of 2
Display Contrast
Patient ID
Time of Day
Power Down All Channels
Anesthesia Mode
>Select an Option or
EXIT
EXIT
General Setup and Operation
SYSTEM
ON
ENTER
CANCEL
PAGE
DOWN
1-11