Associating the PC Unit with a patient provides a means of
identifying the device(s) that will deliver
particular patient.
To associate the PC Unit with a new patient
1.
Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
2.
Power on PC Unit.
3.
To select New Patient?, press Yes soft key.
4.
To accept current profile, press Yes soft key.
OR
To proceed to profile selection screen, press No soft key.
• Patient ID Entry screen appears.
• Green
READY LED
ready to scan.
5.
To accept profile selection, press
• Panel Lock screen appears.
Alaris
System Directions for Use
®
Auto-ID Module Section
Patient Identification
medications to that
IV
New Patient
:
ID
illuminates, indicating system is
CONFIRM
WARNING
Use only the hand-held external
scanner supplied by Cardinal
Health. Using other accessories
may result in increased emissions
or decreased immunity of the
Alaris
Ready to
scan indicator
soft key.
Programming
System.
®
READY
SCAN
CANCEL
Programming
6-3