Primary Infusion
b. To accept, press
6.
Start applicable infusion, as described in following
procedures:
Continuous Infusion
Bolus Dose
Intermittent Infusion
IV Fluid Infusion
NOTE:
At the start of a Syringe Module infusion program, the system
prompts to select and confirm the syringe type and and size.
The system automatically detects the syringe size, and lists
syringe types and sizes that most closely match the installed
syringe. If the syringe is not recognized, Syringe not
recognized displays.
Continuous Infusion
When using a drug listed in the Guardrails
drug parameters are automatically calculated, based on:
• drug selected
• weight entry (if required)
• rate or dose entry
•
entry (Syringe Module: if other than All)
VTBI
Alaris
System Directions for Use
®
Pump and Syringe Modules Section
- With Guardrails
®
soft key.
CONFIRM
Drug Library, the
®
Suite MX Protection (Continued)
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
A A
Syringe Selection
BD 30 mL
Monoject 30 mL
>Confirm Syringe Size
ALL
CONFIRM
SYRINGES
Programming
2-19