Infusion - NO
1.
Set up infusion as described in "Continuous Infusion -
Drug Calculation" procedure, but do not start infusion.
2.
Press
soft key.
BOLUS
3.
To enter bolus dose, use numeric data entry keys.
• After a bolus dose and weight (if used) are entered,
bolus
and concentration [conc] alternate in Main
VTBI
Display.
4.
Press soft key next to appropriate unit of measure for
dose.
5.
To enter bolus duration, use numeric data entry keys.
•
TOTAL DOSE
6.
Verify parameters are correct and press
Stopping and Restoring Bolus Dose
Reference "Primary Infusion - With Guardrails
Protection", "Bolus Dose" procedure.
NOTES:
If mcg or mg is selected as the dosing unit, a
entry cannot be made. If mcg/kg or mg/kg is
WEIGHT
selected as the dosing unit, a
required.
To see details during the bolus infusion, press the
key.
SELECT
2-50
Programming
Guardrails
Suite MX Protection (Continued)
®
Bolus Dose
alternates with
INFUSE AT
PATIENT WEIGHT
rate.
soft key.
START
Suite MX
®
PATIENT
entry is
CHANNEL
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
A A A
Drug Calculation
BOLUS DOSE
mcg
_ 2000
DOSE
mcg/kg
PATIENT
mg
WEIGHT
DURATION
mg/kg
[Conc]: 5000 mcg/mL
>Select the Desired Dosing
Units
CONT-
SETUP
INUOUS
Alaris
System Directions for Use
®
Pump and Syringe Modules Section