Cardinal Health Alaris 8000 Series Directions For Use Manual page 105

Infusion - NO
Continuous Infusion - Drug Calculation (Continued)
15. Verify parameters are correct and press
Pausing, Restarting, Restoring Infusion
Reference "Primary Infusion - With Guardrails
Protection", "Continuous Infusion" procedure.
Changing Rate or VTBI During Infusion
Reference "Primary Infusion - With Guardrails
Protection", "Continuous Infusion" procedure.
NOTES:
Do not enter a patient weight if weight is not used in the
calculation.
Pump Module: At rates less than
displayed to two decimal places, and the
and is displayed to two decimal places.
Pump Module: In the Drug Calculation mode, the system
infuses at the calculated rate rounded to the nearest one-
hundredth of a mL per hour (as displayed on the programming
screen). The rate shown in the Rate Display will be rounded
to the nearest one-tenth of a mL per hour.
Alaris System Directions for Use
®
Pump and Syringe Modules Section
Guardrails Suite MX Protection (Continued)
®
START
®
®
mL/h, the rate is
10
VTBI
soft key.
Suite MX
Suite MX
can be entered
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
A A A
Drug Calculation
CONTINUOUS INFUSION
4.2
RATE
mL/h
50
mL
VTBI
5
DOSE mcg/kg/min
[Conc]: 5000 mcg/mL
>Press START
SETUP BOLUS START
PAUSE
Programming
2-49